The ideal temperature shall range between 15° C and 35° C.
The ideal humidity shall range between 30 and 60%.
FRIGOMAT s.r.l. declines any liability for damages to persons and/or things due to a
wrong installation and/or the non-compliance with the industrial accident prevention
standards. Never touch the machine with hands, both when it is on duty and during
cleaning and maintenance operations, without making sure that the machine has been
stopped by means of pushbutton STOP and the master switch has been turned off. Never
clean the machine by means of high pressure jets of water. Never close the cut-off cock
while the machine is running. Pay attention not to damage the feeder. In case of necessity,
make it be replaced.
In case the machine provided with water-cooling is left at a room temperature inferior to
0° C, it is necessary to run off all water present inside the condenser before starting up the
machine.
9 - ENGLISH
clockwise. In case it is clockwise, exchange the
phases of the power supply plug.
Limb shearing hazard.
This operation must be carried out by authorized
technicians only in compliance with the safety
standards in force.
Press STOP pushbutton to stop the machine.
Do not let the machine run empty for a long
time.