Télécharger Imprimer la page

Gaspardo PA1 GRINTA Emploi Et Entretien page 46

Fertilisant
Masquer les pouces Voir aussi pour PA1 GRINTA:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 101
ENGLISH
3.1 TECHNICAL DATA
FRONT TANK
Row number
Load capacity of the fertilizer hopper
Distributor
Distribution
Weight
Three- point universal joint
Dimensions
HYDRAULICALLY OPERATED FAN - TRACTOR DEPENDENT
Tractor oil delivery
The pressure of return circuit
Max. working pressure (hydraulic blower system)
Acoustic pressure level
HYDRAULICALLY OPERATED FAN - TRACTOR INDEPENDENT
PTO (rpm)
Acoustic pressure level
Power take-off
Oil hopper capacity
Max. working pressure (hydraulic blower system)
TRACTOR SPECIFICATIONS
Three- point universal joint
Battery voltage
Tractor pump pressure (max)
Tractor hydraulic connections
12 V electrical connections
The technical data and the models provided must be considered as non binding. We reserve the right to change them without
notice.
3.2 HANDLING
If the equipment is to be moved, it is necessary to raise each part
and hook it onto the respective mountings shown in (Fig. 5) with
hoisting apparatus of suitable lifting capacity.
As this operation is dangerous, it must be carried out by trained,
responsible personnel. The machine weight is shown on the
identification label (Fig. 1).
The mass of the equipment is shown in the Technical Data table
of the user and maintenance booklet and is determined by the
sum of the weight and the load shown in the table.
Stretch the cable to level the machine.
The hooking points are shown by the graphic "hook" symbol (13,
Fig. 2).
• Packaging materials (pallets, cartons, etc.) must be disposed
of as prescribed by the existing regulations through
authorised disposal companies.
• Parts making up the machine must not be lifted by hooking
them up from moving or weak parts such as guards, electrical
runways, pneumatic parts, etc.
• Standing under suspended loads is not allowed; unauthorised
personnel are not allowed access to the work sites; it is
mandatory to wear overalls, safety footwear, gloves and a
hardhat.
46
Height
Width
Length
LpA (A)
LpA (A)
U.M.
[bar]
Hydraulic blower drive:
Transmission wheel
Lights kit
ATTENTION
USE AND MAINTENANCE
U.M.
[nr.]
[l] (kg)
[nr.]
[kg] (lb)
[nr.]
[m]
[m]
[m]
[l/min]
[bar]
[bar]
[dB]
[r.p.m.]
[dB]
[nr.]
[l]
[bar]
[nr.]
[V]
180
fig. 5
g
PA1
6 - 8 - 12
1260 (1500)
1
Mechanical (Electrical - Optional)
530 (1166)
II
1,54
2,38
1,30
32
0 (max. 10)
150
84,2
1000
84,2
1 (front)
55
150
II
12
nr. 1 double-acting +
nr. 1 exhaust (without pressure - max 10bar).
nr. 1 double-acting
7-pole connector;
cod. G19502171

Publicité

loading