Personal Safety - GreenWorks Tools 2100607 Manuel D'utilisation

EN
FR DE ES

PERSONAL SAFETY

„ Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the influence of drugs, alcohol or medication. A
moment of inattention while operating power tools may
result in serious personal injury.
„ Use personal protective equipment. Always wear
eye protection. Protective equipment such as dust
mask, gloves, non-skid safety shoes, hard hat, or
hearing protection used for appropriate conditions will
reduce personal injuries.
„ Prevent unintentional starting. Ensure the switch
is in the off-position before connecting to power
source and/or battery pack, picking up or carrying
the tool. Carrying power tools with your finger on he
switch or energizing power tools that have the switch
on invites accidents.
„ Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may result
in personal injury.
„ Do not over-reach. Keep proper footing and
balance at all times. This enables better control of he
power tool in unexpected situations.
„ Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewellery or long
hair can be caught in moving parts.
„ Use of hearing protection reduces the ability to hear
warnings (shouts or alarms). The operator must pay
extra attention to what is happening around the work
area.
„ If devices are provided for the connection of dust
extraction and collection facilities, ensure these
are connected and properly used. Use of dust
collection can reduce dust-related hazards.
POWER TOOL USE AND CARE
„ Do not force the power tool. Use the correct power
tool for your application. The correct power tool will
do the job better and safer at the rate for which it was
designed.
„ Do not use the power tool if the switch does not
turn it on and off. Any power tool that cannot be
controlled wi h the switch is dangerous and must be
repaired.
„ Disconnect the plug from the power source and/or
the battery pack from the power tool before making
any adjustments, changing accessories, or storing
power tools. Such preventive safety measures reduce
the risk of starting the power tool accidentally.
„ Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
IT PT NL SV DA NO
English (original instructions)
FI HU CS RU RO PL
less likely to bind and are easier to control.
„ Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained
users.
„ Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and
any other condition that may affect the power
tool's operation. If damaged, have the power tool
repaired before use. Many accidents are caused by
poorly maintained power tools.
„ Do not let debris build up on your trimmer. Clean often
to maintain proper ventilation. Observe cleaning guides
in this manual.
„ Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to
be performed. Use of the power tool for operations
different from those intended could result in a
hazardous situation.
BATTERY TOOL USE AND CARE
„ Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used wi h
another battery pack.
„ Use power tools only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire.
„ When battery pack is not in use, keep it away from
other metal objects like paper clips, coins, keys,
nails, screws, or other small metal objects that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause
burns or fire.
„ Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, flush with plenty of soap and
water. If liquid contacts eyes, immediately seek
medical help. Liquid ejected from the battery may
cause irritation or burns.
SERVICE
„ Have your power tool serviced by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the power tool is
maintained.
MAINTENANCE
„ After use and before storage, disconnect the machine
from the battery and check for damage.
13
SL HR ET LT LV SK BG