Care And Maintenance - Mesto FERRUM PLUS 3560P Mode D'emploi

GB IRL

Care and maintenance

• Disassemble the pump [4] and grease the diaphragm [16].
• Clean the nozzle [17] under running water.
under running water.
• Grease the O-rings [15] and [20].
the device in regular intervals.
Faults
parts pouch [3],
Fault
No pressure builds up in
the device
Liquid is forced up out of
the air pump
The nozzle does not
sure is present
not close.
Liquid emerges without
the lever being activated.
AUS USA
Cause
The pump is not screwed on
O-ring [15] on the pump is
Diaphragm [16] defective
Filter [18]
- and nozzle [17]
clogged
O-ring [20] of the pressure
bolt is not greased / lubrica-
ted
Pressure bolt [21] or
O-ring [20] defective
NZ
Remedy
Replace the O-ring
Replace the diaphragm
Clean or replace the valve disk
or /
is
Grease the O-ring of the pressu-
re bolt
Replace the pressure bolt or
O-ring
see title page.
18
CDN IND