After Usage; Care And Maintenance - Mesto 3598BM Mode D'emploi

EN
Spraying pressure
1,0 bar (14.5 psi)
1,5 bar (21.8 psi)
2,0 bar (29.0 psi)
3,0 bar (43.5 psi)
4,0 bar (58.0 psi)
pump some more.
+

After Usage

Never leave liquid in the device.
the tank. (Fig. 4).
2. Remove the cover [10+11]. (Chapter entitled „Preparation" Points 2, Fig. 5a + 5b)
Collect and dispose of the residual liquid and the tank according to all applicable
laws, requirements and regulations.
tected from sunlight and freezing temperatures.

Care and maintenance

• Disassemble the pump [2] and grease the diaphragm [22].
• Grease the O-rings [21] and [29] (Fig. 17, 22h)
a) Loosen the four screws and pull the half shells [42] apart.
• Grease the O-rings [24]
0,46 l/min
0,56 l/min
0,65 l/min
0,79 l/min
0,91 l/min
(Fig. 18).
(Fig. 19).
18
ENGLISH
on the pressure gauge [15].
from the optimum level,
.
-