Troubleshooting Guide; Corrective Action - Hatco FSHC-6W Série Manuel D'installation Et D'utilisation

TROUBLESHOOTING GUIDE

WARNING
This unit must be serviced by trained and qualified
personnel only. Service by unqualified personnel may lead
to electric shock or burn.
Symptom
Unit is plugged in, but
nothing works.
Unit operates, but is not
circulating air inside cabinet.
Unit is not producing any
"hot air" inside cabinet.
Unit is producing erratic
temperatures inside cabinet.
Unit is heating, but is not
producing humidity inside
cabinet. Low water light is
OFF and unit is full of water.
Unit is heating, but is not
producing humidity inside
cabinet. Low water light is
ON, but unit is full of water.
Troubleshooting Questions?
If you continue to have problems resolving an issue, please
contact the nearest authorized Hatco Service agency or Hatco
for assistance. To locate the nearest Service agency, log onto
the Hatco website at www.hatcocorp.com and click on
Find Service agent, or contact the Hatco Parts and Service
Team at:
Telephone: 800-558-0607 or 414-671-6350
e-mail: partsandservice@hatcocorp.com
Fax: 800-690-2966 or 414-671-3976
Probable Cause
Unit not turned on.
No power to unit.
Tripped circuit breaker.
Power cord is damaged.
Defective POWER ON/OFF (I/O) switch.
Blower motor defective.
Incorrect voltage supplied to blower motor. Contact authorized Service agent or Hatco for assistance.
Safety high-limit is tripped or open.
Incorrect voltage supplied to heating
element.
Blower motor not working.
air heating element(s) defective.
air thermostat control is defective.
air down tube is not connected/removed.
Water heating element is defective.
Humidity thermostat control is set too low. adjust humidity control to higher setting.
Humidity thermostat control defective.
Water level sensor defective.
ELECTRIC SHOCK HAzARD: Turn OFF power switch,
unplug power cord, and allow unit to cool before
performing any cleaning, adjustments, or maintenance.
move POWER ON/OFF (I/O) switch to the ON (I) position.
Check electrical receptacle and verify that power
supply matches specifications on unit. If receptacle is
not working, check circuit breaker and reset, or plug
unit into a different known working receptacle.
Check circuit breaker and reset, if tripped.
Contact authorized Service agent or Hatco for assistance.
Contact authorized Service agent or Hatco for assistance.
Contact authorized Service agent or Hatco for assistance.
Contact authorized Service agent or Hatco for assistance.
Contact authorized Service agent or Hatco for assistance.
Contact authorized Service agent or Hatco for assistance.
Contact authorized Service agent or Hatco for assistance.
Contact authorized Service agent or Hatco for assistance.
Reconnect/Install air down tube. Contact authorized
Service agent or Hatco for assistance.
Contact authorized Service agent or Hatco for assistance.
Contact authorized Service agent or Hatco for assistance.
Contact authorized Service agent or Hatco for assistance.
12
English
WARNING

Corrective Action

Form No. FSHC67m-0714