Atlas Copco LZB14-L-A007-11 ATEX Mode D'emploi page 8

Safety Information
Description Value
Special restriction, X
for example ambi-
ent temperature
range.
Useful information
Website
Log in to Atlas Copco: www.atlascopco.com.
You can find information concerning our products, acces-
sories, spare parts and published matters on our website.
Country of origin
Please refer to the information on the product label.
Warranty
• Product warranty will expire 12 months after the product
is first taken into use, but will in any case expire at the
latest 13 months after delivery.
• Normal wear and tear on parts is not included within the
warranty.
• Normal wear and tear is that which requires a part
change or other adjustment/overhaul during standard
tools maintenance typical for that period (expressed
in time, operation hours or otherwise).
• The product warranty relies on the correct use, mainte-
nance, and repair of the tool and its component parts.
• Damage to parts that occurs as a result of inadequate
maintenance or performed by parties other than Atlas
Copco or their Certified Service Partners during the war-
ranty period is not covered by the warranty.
• To avoid damage or destruction of tool parts, service the
tool according to the recommended maintenance sched-
ules and follow the correct instructions.
• Warranty repairs are only performed in Atlas Copco
workshops or by Certified Service Partners.
Atlas Copco offers extended warranty and state of the art
preventive maintenance through its ToolCover contracts. For
further information contact your local Service representative.
For electrical motors:
• Warranty will only apply when the electric motor has not
been opened.
ServAid
ServAid is a portal that contains technical information for all
hardware and software products, such as:
- Regulatory and Safety information
- Technical data
- Installation, Operation and Service instructions
- Spare parts lists
- Accessories
8
Definition
© Atlas Copco Industrial Technique AB - 9836 7206 00
ServAid is continuously updated and is available at:
servaid.atlascopco.com
For further information contact your local Atlas Copco repre-
sentative.
Safety Data Sheets MSDS/SDS
The safety data sheets describes chemical products sold by
Atlas Copco.
For more information, consult the website:
www.atlascopco.com/sds
Caractéristiques techniques
Indice IP
L'indice IP des moteurs pneumatiques se réfère au carter mé-
canique conformément à la norme IEC 60529. L'indice IP ne
couvre pas la résistance à la corrosion ou à d'autres liquides
autres que de l'eau douce potable.
Caractéristiques techniques
Référence
Modèle
Consommation d'air à la
vitesse à vide
Consommation d'air à la
vitesse à vide
Consommation d'air à la puis-
sance maxi.
Consommation d'air à la puis-
sance maxi.
Couple de freinage
Couple de freinage
Frein intégré
Matériau des pièces externes Hardened steel/Aluminium
Vitesse à vide
Puissance maxi.
Puissance maxi.
Couple de démarrage mini.
Couple de démarrage mini.
Rapport
Sens de rotation
Code de chargement de l'ar-
bre
Type d'arbre
Vitesse à la puissance maxi.
Couple de calage
Couple de calage
Couple à la puissance maxi.
Couple à la puissance maxi.
Type de palettes
Poids
Poids
LZB14-L-A007-11 ATEX
https://
8411011342
LZB14-L-A007-11
l/s
cfm
4 l/s
8.5 cfm
Nm
ft lb
No
700 tr/min
0.16 kW
0.21 hp
8.5 Nm
6.27 ft lb
Clockwise
a
Keyed
320 tr/min
9.6 Nm
7.1 ft lb
4.8 Nm
3.5 ft lb
Lubrication free
0.33 kg
0.73 livres