Product Specifications; Delivery Form; Acceptable Operating Conditions; Technical Data - Ivoclar Vivadent Quick Mode D'emploi

9. Product Specifications
9.1

Delivery form

1 Quick
1 Anti-glare shield
1 Power cord
1 Extra fuse
1 Operating Instructions
1 Warranty card
Colour:
White (RAL 9016)
9.2

Technical data

Power supply
Single-phase alternating current
Tolerated voltage fluctuations
Power consumption
Voltage of lamp
Type of lamp
Halogen lamp for Quick (only use lamps from Ivoclar Vivadent)
Electrical fuses
Values: T 800 mA (230/240 V) has to comply with IEC 127
T 1.6 A (100/110/120 V) has to comply with UL and CSA
Dimensions of fuses
Dimensions of unit
Lightwave range (filtered)
Weight
Safety information
The Quick complies with the following guidelines:
– IEC 1010-1/EN 61010, Part 1
– UL 3101-1
– CSA 22.2 No. 1010-1
– Directive 89/336/EEC, radio protection / electromagnetic
compatibility
– EMC tested
16
230, 240 V / 50-60 Hz
100, 110, 120 V / 50-60 Hz
± 10%
max 100 W
12 V
230-240 V = ø 5 x 20 mm
100-120 V = ø 5 x 20 mm
Length: 390 mm;
Width: 150 mm;
Height: 130 mm (closed)
400 - 500 nm
2.3 kg

9.3 Acceptable operating conditions

Acceptable temperature range
5–35 °C (41–95 °F)
Acceptable humidity range
Maximum relative humidity at 31 °C (87 °F) gradually
decreasing to 50 % at 35 °C (95 °F), condensation excluded
Acceptable ambient pressure
The unit may be used at altitudes of up to 2000 m
above sea level.
Max. operation
60 seconds
9.4 Acceptable transportation and storage
conditions
Acceptable temperature range
-20 to +50 °C (-4 to +122 °F)
Acceptable humidity range
Maximum relative humidity at 31 °C (87 °F) gradually
decreasing to 50 % at 40 °C (104 °F), condensation excluded
Acceptable ambient pressure
500-1060 mbar
Use only original packaging together with the respective foam
material for shipping purposes.