Changing The Fuse; Important - Ivoclar Vivadent Quick Mode D'emploi

7.3 Cleaning
The unit may only be cleaned when it is cool, since there
is a burn hazard. Do not use any cleaning solutions.
The following parts have to be cleaned from time to time:
Item Frequence
Sensor surface weekly
Lamp lens (outside) every six months
Housing surfaces) weekly
14
7.4
Disconnect power cord (17). The fuse holder (22) is located in the
power socket of the unit (7). Push the lateral fuse stop (24) in the
Cleaning material
direction of the arrow with a screwdriver. The fuse holder (22) is
thus released and may be removed from the unit. Check fuse (20).
cloth
Replace defective fuse and insert new one with its holder into the
power socket (7) until it snaps into place.
Q-tips or cloth
cloth

Changing the fuse

Important

Use only fuses with test labels according to the
respective values specified in "Technical Data"
(Chapter 9.2).
Do not remove the voltage selector (25) or even insert it
in another position. The selected voltage can be seen in
the viewing window of the voltage selector (26)
7
20
21
5
24
22
26
22
25