Product Specifications; Delivery Form; Technical Data; Miscellaneous - Ivoclar Vivadent Gnathometer CAD Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 27

9 Product Specifications

9.1 Delivery form

Delivery forms may varyfrom country to country.

9.2 Technical data

Weight (approximately):
– Mandibular registration plate with registration pin: 13.1 g
– Maxillary registration plate with fixing plate, screw and
washer: 12.8 g
– Bite rim support 1.6 g
– Stylus 1.0 g
Dimensions:
– Registration plate (into which the stylus is screwed)
Width: 29 mm / Length: 55.8 mm /
Material thickness: 2 mm
– Registration plate (to which the fixing plate is attached)
Width: 22 mm / Length: 55.8 mm /
Material thickness: 2 mm
– Bite rim support
Width: 32.5 mm / Length: 54.3 mm /
Material thickness: 2 mm
Material:
– Registration plates: Stainless steel
– Bite rim supports: POM white
– Fixing plates: PMMA, crystal clear
Adjustment options:
– Height adjustment of the stylus: 5 mm

10 Miscellaneous

Tips for Gothic Arch analysis and interpretation
Please also refer to the specialized literature available on this
subject matter.
The device has been developed solely for use in
dentistry. Start-up and operation should be carried
out strictly according to the Operating Instructions.
Liability cannot be accepted for damages resulting from
misuse or failure to observe the Instructions. The user is
solely responsible for testing the apparatus for its suitability
for any purpose not explicitly stated in the Instructions.
Descriptions and data constitute no warranty of attributes
and are not binding.
25

Publicité

Table des Matières
loading

Table des Matières