Function; Ptz - gigamedia GGM DVR16RW Mode D'emploi

4.4. FUNCTION

4.4.1. PTZ

• If you press button of remote controller, or select PTZ in Function Menu, screen will be changed to
FULL screen mode and you can control PTZ camera.
• If you press advance Icon in PTZ window, PTZ- ADVANCE window will pop-up.
4.4.1.1. PTZ BASIC
• If you press 3456 button, camera will pan to left / right or tilt up / down.
• If you press / button or search / log button of remote controller or Click (+), (-) Icon,
7 8
the camera will zoom in or out.
• If you press numeric button of remote controller, target camera will be changed.
4.4.1.2. PTZ ADVANCE
① + : Focus-IN
• FOCUS
② - : Focus-OUT
③ AUTO : AUTO-FOCUS mode
① + : Open Iris
• IRIS
② - : Close Iris
③ AUTO : AUTO-IRIS mode
① + : The control speed will increase
• SPEED
② - : The control speed will decrease
① If you want to go to a specific PRESET-position, select "GO" button
• PRESET
② If you want to scan PRESET-positions, select "SCAN" button
Note : The PRESET-positions are set by PRESET menu [MENU > SETUP > CA-
MERA > PRESET]
The SCAN-lists are set by SCAN-POINT menu [MENU > SETUP > CAMERA >
SCAN-POINT]
① If you click OSD MENU icon in case that Camera itself has OSD function, The
• OSD MENU
② If OSD is not supported by Camera, OSD MENU does not work.
Note : OSD Control function supports only for "Pelco-D" protocol
www.gigamedia.net
FUNCTION menu is divided into 4 sub-menu; PTZ, AUDIO, BACKUP
and LOG VIEW
OSD will be shown in accordance with Camera's OSD.
EN
81