Access List - gigamedia GGM DVR16RW Mode D'emploi

EN
• DDNS use
Input domain name you registered on web browser.
Ex: http://bluemoon.ddnscctv.com
For WAN connection, DVR web port/client port should be forwarded. (Port-forwarding)
In this case, input : (colon) web port.
Ex: If web port is set 1000 on DVR, http://bluemoon.ddnscctv.com:1000
4.2.6.4. CLIENT

4.2.6.5. ACCESS LIST

74
• DDNS setup on DVR
1) Enter SETUP NETWORK
2) Select DDNSCCTV.COM
(3 options: DDNSCCTV.COM, NO-IP.COM, DYNDNS.COM)
3) Input E-mail address & password you registered at
http://ddnscctv.com on USER ID and PASSWORD.
4) Input domain name you registered at http://ddnscctv.com on
HOSTNAME.
Choose one of given CLIENT PORT list, and enter desired value at
WEB PORT, whose default value is 0080. Remember those values
you have entered for the following setup. Total 16 values of CLIENT
PORT are already given for your convenience from 7620-7624 to
7770-7774.
• UPNP (Universal plug & play)
If you activate UPNP function, you don't need to do port forwarding.
(In order to use this function, router that DVR is connected to should
support UPNP function as well)
After checking UPNP, select client port and input web port as you
wish. If you select port that is being used for other network device,
dialog message will pop up "PORT IN USE"
In that case, select another client port and input another web port
that is not used.
Registered IP address is allowed to access DVR.
If you set at least one IP address, then only entered Client IP ad-
dress(es) would be allowed to access DVR.
However, if you do not register any client IP address, any clients
can access DVR.
DDNS
www.gigamedia.net