gigamedia GGM DVR16RW Mode D'emploi page 71

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

4.2.5.2. HDD SMART
This window shows the temperature of HDD.
If you select ON in SMART, you can change the value of the each items.
(1) The temperature threshold means that the temperature of HDD exceeds the desired value you
input, the beep happen and the below MENU appears.
(2) Inspection Cycle is that how many often system check the Temperature of HDD.
(3) Daily time is that if you select the value of inspection cycle as daily, what time system check the
temperature of HDD.
4.2.5.3. AUTO BACKUP
There are 3 options : EXTEND(HDD Extension), MIRROR(Mirroring), Internal HDD(Mirroring)
• EXTEND HDD :
When internal HDD is full, Internal HDD start to overwrite data, the elder data removed from internal
HDD will be stored in external USB- HDD.
This DVR can support max. 4 internal HDD and 4 external USB HDD. Totally 8 HDD supported.
To use this function, you must set 'Overwrite' as 'ON' which you can set from 'Setup' > 'Record' >
'MISC'
A
B
C
Internal HDD
Note : USB HDD : Note that USB-HDD must be external power source
• MIRROR : The data recorded in Internal HDD also simultaneously recorded in External USB HDD.
The data in external USB HDD is recorded in FAT 32 format and backup viewer is copied so you can
playback data connecting external HDD to PC.
Note : After setting auto backup, when you change the port of external HDD(USB port position), you
should set auto backup again.
• Internal HDD : This is similar function with MIRROR. However, if you choose internal HDD, the Data
recorded in internal HDD 1 is simultaneously recorded in international HDD2. If you install 4 Internal
HDD, HDD1 & HDD2 become 1 pair and HDD3 & HDD4 become another pair. Pair 1 & pair 2 can re-
cord same data in this case.
www.gigamedia.net
EXTEND Backup
External HDD
B
C
A
D
Internal HDD
USB HDD
EN
71

Publicité

Table des Matières
loading

Table des Matières