Record - gigamedia GGM DVR16RW Mode D'emploi

4.2.2.7. POSITION
EN
4.2.2.8. POS

4.2.3. RECORD

64
• CAMERA – Select the channel to adjust position.
• LEFT/RIGHT– Move camera position to LEFT or RIGHT on the
screen.
• DEFAULT – Set all values to factory default.
In order to use POS function, click SETUP button.
1) START & END CHARACTER
Start & end code that begins or finishes analyzing data transmit-
ted from POS device.
If you set as on left image, the unit checks text data from next
line of START to prior line of END.
2) LINE BREAK
Options are CRLF, CR and LF. These are the letters that distin-
guish lines.
3) BAUDRATE
Select baud rate to communicate with POS device.
Default Value: 1200
4) DATABIT
Select data bit to communicate with POS device.
Default Value: 8
5) STOPBIT and PARITY
Values cannot be changed. Default values are 1 and NONE.
Click OSD button.
1) CH: Select camera number to match with POS data.
2) DISPLAY LINE: The maximum number of lines that can be over-
layed on screen. (1~22 lines)
3) CLEAR TIME: Time to automatically clear overlayed text data
from screen. (1~60 seconds)
4) ALIGN: Position of text line. Options are LEFT, RIGHT and CENTER.
5) LIVE: Check the box if you want to see text data on live mode.
Only on full channel mode (1ch mode), POS data can be seen.
When you click Record Icon, Record menu is divided into 4 sub-menus:
PARAMETER, SCHEDULE, WATERMARK, AND MISC
www.gigamedia.net