Usb Upgrade - gigamedia GGM DVR16RW Mode D'emploi

4.2.7.5.1 USB UPGRADE

EN
Please select USB upgrade in upgrade window.
Note that HDD must be installed before upgrading firmware.
(1) Unzip firmware file first then copy it to your USB memory stick
(2) Attach USB Memory which includes Firmware into USB Port.
(3) Enter UPGRADE icon to upgrade firmware, then small windows will appear.
(4) Please click OK Icon and the message dialogue to confirm will popup,
(5) And please click OK, or CANCEL to proceed.
(6) It will take some minutes to upgrade, and then DVR will be rebooted automatically after upgrade
is finished.
4.2.7.5.2. NETWORK UPGRADE
4.2.7.6. TURN OFF DVR
78
Please select network upgrade in upgrade window
(1) Select UPGRADE , then small window will appear.
(2) Select NETWORK UPGRADE and press ENTER button.
(3) Check out whether Server IP and FILE NAME are correct. If
shown information is wrong, correct SERVER IP and FILE NAME
and press ENTER button to input new information by text input Dia-
log box.
Note : Make sure the information of Server IP & File name through
your supplier.
(4) Select OK and press ENTER button to start S/W upgrade.
After completing upgrade, the system will reboot automatically.
If you want to turn off DVR, please press 'TURN OFF DVR' then
press 'OK' button as below screen.
www.gigamedia.net