gigamedia GGM DVR16RW Mode D'emploi page 77

4.2.7.5. UPGRADE
www.gigamedia.net
• USER – There are two unchangeable user IDs (ADMIN, NETU-
SER), and additionally you can add 20 additional USERs by your
own.
• PASSWORD – Initial password for each user is set to '0000'. When
you create a new account, make sure that you have to enter new
PASSWORD. And don't forget the Password.
• SETUP – Check this box then the user is authorized to go into
setup menu
• DVR – Click SET button then DVR setup detail will pop up. You can
give authorities of REC, PLAY(SEARCH), BACKUP and PTZ to each
user as you wish.
• NETWORK – Check this box then the user is authorized to access
to DVR via network (Web, CMS)
• TIME OUT – When this is set to ON, LOGIN window will re-appear
after entered time from any signal input. If you want to log out,
you need to go to MENU and select LOG OUT like right picture.
• MONITOR – First select ON to give monitoring authority to each
user. Then click CH button to select monitoring channel the user
can access.
• PAGE – Move to next page to create and configure more users.
If you open this menu, you can see the current firmware version of DVR.
If you would like to upgrade firmware of DVR, please follow the
below steps.
If you click upgrade icon, the small upgrade window will pop up
There are two ways : USB UPGRADE, NETWORK UPGRADE.
Note : There is two methods to upgrade the DVR system.
- USB UPDATE - Upgrade the DVR system by using USB memory stick.
- NETWORK UPDATE - Upgrade the DVR system through Internet.
EN
77