Mouse - gigamedia GGM DVR16RW Mode D'emploi

3.4.8. Sequence mode
• If you press SEQ button in case of FULL or QUAD screen mode, screen(s) will rotate automatically.
• Default value of cannel changing interval is 2 or 3 seconds.
• User can select changing interval value from 1 to 99 seconds.
• User can select desired channel to display
3.4.9. Digital-ZOOM
• If you press ZOOM key of remote controller while in full screen mode, Digital-ZOOM function will
work.
• If you press direct button of remote controller, Zoom-Area window will move.
• If you press ZOOM key again, Zoom-Area window will be enlarged or diminished.
• If you press ENTER key, selected Zoom-Area will be displayed as full screen.

3.5. MOUSE

• System supports USB MOUSE
• Just connect USB mouse, then DVR will detect it automatically.
• Some kinds of USB mouse may not be compatible with product.
3.5.1 Change screen mode
Left button of mouse is for selecting an item. Right button of mouse is usually for canceling menu
table or going to former menu mode. Additionally, if you press right button of mouse on basic screen,
following window will appear.
• If you double-click left button on a specific channel, the screen changes into full screen mode. With
double-click again, screen will go back to previous mode.
• At PIP mode, if you want change channel of small window, click right button of mouse. Then, screen
mode menu will appear. Click desired channel button.
3.5.2 Pop the windows to input the values
In the Menu status, right button of mouse is used for pop the windows to input numbers or characters
in windows
www.gigamedia.net
EN
57