Camera - gigamedia GGM DVR16RW Mode D'emploi

4.2.1.2. DISPLAY-LIVE-SEQ(FULL)
4.2.1.3. DEINTERLACE
4.2.1.4. VGA RESOLUTION

4.2.2. CAMERA

www.gigamedia.net
• Set switching time to display a full screen in sequence.
• CH : Input desire channel no.
• TIME : Input desired switching time
• DEFAULT CH : Change to factory default value
• ALL TIME : same time is input to all channel.
Note : The time is second and maximum 99 second for switching
time can be entered.
Please select "ON" if you don't want to get interlaced video with D1
resolution, then video quality at D1 in playback will be better than
setting "OFF".
Select appropriate VGA resolution according your VGA monitor.
(There are three kinds of VGA resolutions; 800x600, 1024x768,
1280x1024)
When you click Camera Icon, Camera menu is divided into 7 sub-
menus: GENERAL, PRIVATE ZONE, PTZ, PRESET, SCAN POINT,
COLOR, and POSITION
EN
61