gigamedia GGM DVR16RW Mode D'emploi page 76

4.2.7.3. INPUT DEVICE
EN
How to set up System-ID status
• System-ID status shows whether the system will accept key from remote-controller or not.
• SYSTEM-ID is used when user operates several systems with one remote controller.
SYSTEM- ID will be displayed when SYSTEM- ID is other than 0(zero).
• By using DVR-ID button of remote controller, Remote controller can be matched with SYSTEM- ID,
or if SYSTEM- ID is 00, system-ID is not displayed and system accept key from remote controller.
• If SYSTEM- ID color is Yellow, the system accepts remote-controller key input.
• If SYSTEM- ID and Active-ID are not matching, SYSTEM- ID color will be Red and the system does
not accept remote-controller key input.(No beep)
How to match SYSTEM- ID by remote controller
(1) Press DVR-ID button of remote controller.(You can hear short double-beep.)
(2) Then, press desired System-ID by using 2 numeric button. (E.g. 02 or 03 or 01)
4.2.7.4. USER
76
• SYSTEM-ID – Input the number that you want to register in this DVR.
• KEYBOARD – DVR system can be connected with control keyboard.
• KEY-TONE – Beep whenever button is pressed if ON is selected.
R : 01
Not working
Working
R : 02
R : 03
Not working
There are 2 fixed users which are ADMIN and NETUSER. Their va-
lues of authority are already set and unchangeable like the below
picture. Additionally, you can create Max. 20 more authorized ac-
counts, and you can give various authority levels to each account
to control DVR system by checking each box.
ACTIVE ID : 02
www.gigamedia.net