EUROM Sani Towel 500 Mode D'emploi page 22

9. Place the device (Figure 9, pos. 1) over the
wall brackets.
10. Screw and tighten the device with four large
screws (Figure 9, pos. 3) to the wall bracket
using a Phillips screwdriver (Figure 9, pos. 4).
11. Place the four sealing caps (Figure 9, pos. 5).
Installation
WARNING
Never use an extension cord to provide power to the device.
CAUTION
Make sure that the main voltage is the same as indicated on the identification
label of the device. All electrical connections must stay dry under all
circumstances.
1. Make sure the device is correctly mounted.
2. Place the power plug (Figure 10, pos. 1) into a
wall socket that is easily accessible. Use a wall
socket with a minimum power of 800 Watt.
3. The ON/OFF indicator will light up (Figure 10,
pos. 3).
22
Figure 9
Figure 10