EUROM Sani Towel 500 Mode D'emploi page 21

1. Place the device on a non-flammable and
solid wall.
2. Place the device with a minimum distance
(Figure 6) of:
•
15 cm from the ceiling;
•
15 cm from the side walls;
•
60 cm from the floor;
•
50 cm clearance on the front side.
3. Do not mount the device:
•
immediately below a socket outlet;
•
on a ceiling or roof.
4. Place the included assembly drawing
(Figure 7, pos. 1) against the wall and mark
the four holes.
5. Drill four holes at the marked spots.
6. Place the plugs (Figure 7, pos. 2).
7. Screw the four outer wall brackets with self-
tapping screws (Figure 8, pos. 2) in to the four
plugs.
8. Attach the four inner wall brackets (Figure 8,
pos. 1) to the outer wall brackets with small
screws (Figure 8, pos. 3) using a Phillips
screwdriver (Figure 8, pos. 4).
Figure 6
Figure 7
Figure 8
21