Kärcher BR 30/1 C Bp Manuel D'utilisation page 17

5. Press and hold the ON/OFF switch.
After approx. 3 s, the rinsing function is activated,
the cleaning rollers rotate and are rinsed.
The ON/OFF switch flashes.
6. Release the Boost function button and the ON/OFF
switch.
7. The device switches off automatically after approx.
2 minutes.
The rinsing function can be ended at any time by
pressing the ON/OFF switch.
8. Empty the waste water tank (see chapter Emptying
the waste water tank).
9. Check the filling level in the fresh water tank, if nec-
essary fill the fresh water tank accordingly (see
chapter Filling the fresh water tank).
Ending operation
1. Press the ON/OFF switch.
Illustration L
The device switches off.
2. Bring the device into the parking position (see chap-
ter General notes on operation).
3. Press the battery pack unlocking button, and pull the
battery pack out of the battery mount.
Illustration R
4. Charge the battery pack.
Also charge partly discharged battery packs after
use.
ATTENTION
Adhering dirt deposits
Adhering dirt deposits can damage the device in the
long term.
It is recommended to clean the device completely after
each application.
5. Clean the device (see chapter Cleaning the device).
Storing the device
ATTENTION
Risk of damage and odour development from liq-
uids and damp dirt
Liquids and damp dirt in the device can lead to bacterial
accumulation and odour development when not in use
or in storage.
Damp dirt can dry up in the device and on the cleaning
rollers, and impair the cleaning performance of the de-
vice.
Empty the fresh water tank and waste water tank at the
end of work and before storing the device.
Clean the waste water tank, the sweep bins and the
cleaning rollers.
Allow the clean cleaning rollers to dry in the air, e.g.
mounted on the device on standing vertically. Do not
place wet cleaning rollers on moisture-sensitive surfac-
es, in closed containers or cupboards.
1. Clean the device (see chapter Cleaning the device).
2. Clean the waste water tank (see chapter Cleaning
the waste water tank).
3. Clean the sweep bins (see chapter Cleaning the
sweep bins).
4. Clean the cleaning rollers (see chapter Cleaning
the cleaning roller).
5. Charge the battery pack (see operating instructions
for the battery pack and charger).
6. Bring the device into the parking position (see chap-
ter General notes on operation) and store in a dry
interior.
CAUTION
Failure to observe the weight
Risk of injury and damage
Be aware of the weight of the device during transporta-
tion.
1. To carry the device, reach into the handle bowl un-
der the battery mount.
Illustration S
2. When transporting the device in vehicles, secure it
to prevent it from slipping or overturning in accord-
ance with the respectively applicable guidelines.
CAUTION
Failure to observe the weight
Risk of injury and damage
Be aware of the weight of the device during storage.
The device may only be stored indoors.
1. Press the battery pack unlocking button, and pull the
battery pack out of the battery mount to avoid dis-
charging the battery pack.
Illustration R
Cleaning the device
Cleaning the device
ATTENTION
Risk of damage and odour development from liq-
uids and damp dirt
Liquids and damp dirt in the device can lead to bacterial
accumulation and odour development when not in use
or in storage.
Damp dirt can dry up in the device and on the cleaning
rollers, and impair the cleaning performance of the de-
vice.
Empty the fresh water tank and waste water tank at the
end of work and before storing the device.
Clean the waste water tank, the sweep bins and the
cleaning rollers.
Allow the clean cleaning rollers to dry in the air, e.g.
mounted on the device on standing vertically. Do not
place wet cleaning rollers on moisture-sensitive surfac-
es, in closed containers or cupboards.
1. Press the ON/OFF switch.
Illustration L
The device switches off.
2. Bring the device into the parking position (see chap-
ter General notes on operation).
3. Wipe off dirt and detergent residues on the housing
with a damp cloth.
4. Remove the fresh water tank, empty it and put it
back in the device (see chapter Filling the fresh wa-
ter tank).
Cleaning the waste water tank
ATTENTION
Adhering dirt deposits
Adhering dirt deposits can damage the device in the
long term.
It is recommended to clean the device after each appli-
cation.
Clean the waste water tank regularly.
1. Press the ON/OFF switch.
Illustration L
The device switches off.
English
Transport
Storage
17