Télécharger Imprimer la page

Pentair MASTERTEMP MT200HD Guide D'installation Et D'utilisation page 2

Publicité

Les langues disponibles

Les langues disponibles

| Technical Data
i
Technical Data
General Specifications
GAS TYPE:
GAS GROUP:
GAS SUPPLY PRESSURE:
TYPE OF APPLIANCE:
COUNTRY OF DESTINATION:
READ THE TECHNICAL INSTRUCTIONS BEFORE INSTALLING THIS APPLIANCE.
READ THE INSTALLATION AND USER'S GUIDE BEFORE LIGHTING THIS APPLIANCE.
6
MODEL NO.
SERIAL NO.
GAS SUPPLY PRESSURE:
G20:
G31:
TEST POINT PRESSURE
MAX. WORKING PRESSURE
APPLIANCE CATEGORY
COUNTRY OF DESTINATION
YEAR OF MANUFACTURE
ELECTRICAL RATINGS:
VOLTS:
HERTZ:
AMPS:
APPROVED FOR INDOOR AND OUTDOOR INSTALLATIONS ELECTRICAL COMPLIANCE: IN ACCORDANCE
WITH LOCAL ELECTRICAL CODES.
THIS APPLIANCE MUST BE INSTALLED IN ACCORDANCE WITH THE EUROPEAN STANDARD INSTALLATION
CODES, AND WITH THE REQUIREMENTS OF THE AUTHORITY HAVING JURISDICTION.
P/N 475106 Rev. D 1/2016
MASTERTEMP
Pool and Spa Heater Installation and User's Guide
All manuals and user guides at all-guides.com
MASTERTEMP
DESIGN AND MANFACTURED BY PENTAIR WATER POOL AND SPA, INC.
mbar,
mbar
G25:
mbar
mbar
3.45 mbar
GB, BE, DE, FR
Hz
12 A
WARNING!
POOL HEATER
THIS HEATER IS EQUIPPED TO BURN
INPUT RATE
ORIFICE SIZE
OUTPUT
ALTITUDE
MINIMUM CLEARANCE FROM COMBUSTIBLE
CONSTRUCTED 15 CM REAR, 15 CM TOP
DO NOT INSTALL THIS HEATER UNDER AN OVERHANG
LESS THAN 1 METER FROM THE TOP. THE AREA UNDER
THE OVERHANG MUST BE OPEN ON THREE (3) SIDES.
V
REFER TO THE OPERATING INSTRUCTIONS FOR
APPROVED WATER TREATMENT.
TYPE G23
GAS
kW
mm
kW
2000 m
Label P/N
P/N 475106 Rev. D 1/2016

Publicité

loading

Ce manuel est également adapté pour:

Mastertemp mt300hdMastertemp mt400hd