Screen Saver; Manual Setting; Infrared Night Vision; Night Light - Angelcare AC1300 Manuel De L'utilisateur

6.4 - SCREEN SAVER

Allows you to set the screen saver starting point.
1
2
73 F
3 4
ON
20 sec

MANUAL SETTING:

To trigger manually the Screen Saver mode press
and hold the Parent Unit LCD/Exit button.

6.5 - INFRARED NIGHT VISION

Allows you to capture image when lighting
is insufficient.
1
73 F
A Night View icon will appear at the top
of the Parent Unit screen.
2
73 F
The Night View icon will disappear at the top
of the Parent Unit screen.

6.6 - NIGHT LIGHT

Allows you to use your monitor as a night light.
TO ACTIVATE THE LIGHT:
Push the button on the back of the right "wing"
to turn the Night Light ON or OFF.
6.7 - PAGER
Allows you to locate the Parent Unit.
TO LOCATE PARENT UNIT:
Press the Pager/Hold button for less
than 2 seconds. The Parent Unit will emit
a paging sound for one minute.
All manuals and user guides at all-guides.com
1) Press Menu/Select button to access
2) Select the Settings iconto access
3) Select the Screen Saver icon.
4) Use the up and down arrows to select
5) Press Menu/Select button to confirm.
5
1) The infrared LEDS will turn ON
2) If the light is bright enough in the room,
main menu.
sub-menu.
the delay before Video mode turns into
Screen Saver mode.
NOTE:
The LCD screen will turn black when video is in
Screen Saver mode. Press any button to return
to Video mode.
automatically when the lighting is not
sufficient, to give a night view on LCD
display.
NOTE:
When the Infrared Night Vision is ON, only
black and withe image will be displayed on the
LCD screen.
the infrared LED on the Nursery Unit
will turn OFF automatically.
IMPORTANT
If you press the Pager/Hold
button on the back of the
Nursery Unit for more than
2 seconds, you will put the
movement monitoring on Hold.
To unhold, push the button
again.
E
N
15