Angelcare AC1300 Manuel De L'utilisateur page 11

TO STOP THE ALARM
On the Parent Unit, press any key
to stop the alarm.
TO ADJUST THE SENSOR PAD SENSITIVITY LEVEL:
1
2
73 F
ON
3
20 sec
TO ACTIVATE THE TIC FUNCTION:
Allows you to hear a TIC sound when Sensor Pad function is activated.
1
2
73 F
3
IMPORTANT
• The Sensor Pad is not designed for use with adults, children or infants older than 24 months.
• Once you are finished using the Sensor Pad, deactivate the movement function and please
remove it from the baby's crib and store it away.
5.2 - SOUND
TO ACTIVATE SOUND:
1
2
3
TO TEST THE SOUND:
Ask someone to speak into
4 the Nursery Unit or place the
unit near a radio to ensure that
sound is being picked up.
IF YOU HEAR NO SOUND:
All manuals and user guides at all-guides.com
OR
button on the Nursery Unit.
4
5
4
1) Press Menu/Select button to access main menu.
2) Select the Sound icon.
3) Use the up and down arrows to activate or
4) Press Menu/Select button to confirm.
Press the Pager/Hold
1) Press Menu/Select button to access
main menu.
2) Select the Settings icon to access sub-menu.
3) Select the Movement Sensitivity icon.
4) Use the up and down arrows to choose
the desired sensitivity level (1 to 5).
5) Press Menu/Select button to confirm.
NOTE: If you are receiving false alarms,
adjust the sensitivity level.
1) Press Menu/Select button to access
the main menu.
2) Select the TIC icon.
3) Use the up and down arrows to activate
or deactivate the TIC function.
4) Press Menu/Select button to confirm.
Regular TIC sound will emit from Parent Unit
and a pendulum will appear on the Parent Unit
indicator bar.
deactivate the sound.
• Check that both units are powered ON.
• Check that both units are plugged into
functioning electrical outlets.
• Check the batteries in both units
(replace or recharge them if necessary).
• Bring the Parent Unit closer to the Nursery
Unit.
IMPORTANT
To avoid feedback (whistling), keep both units
at least 10 feet apart (3 meter).
E
N
11