Angelcare AC1300 Manuel De L'utilisateur page 12

73 F
5.3 - BATTERIES
HOW TO CHECK THE BATTERIES:
Unplug the adapters from both units.
• If the green light on the Nursery Unit
does not show, replace the batteries.
• If the Parent Unit and its screen do not
light up, recharge the batteries.
HOW TO CHARGE THE BATTERIES IN THE PARENT UNIT:
Leave the Parent Unit plugged to fully
charge the unit. Although the batteries
at 1/3 capacity works normally,
we recommend that you fully recharge them.
YOU ARE NOW READY TO USE YOUR MONITOR
The Angelcare
or you can also customise your settings to your preference.
DEFAULT SETTINGS
Sound Mode: ON
Speaker Volume: Level 3 (of 6)
Movement Mode: ON
Sensor Pad Sensitivity: Level 3 (of 5)
TIC: ON
Temperature Unit: Fahrenheit USA/Celsius Canada
Temperature Alarm: OFF
VOX: OFF
VOX Level: Level 2 (of 4)
Screen Saver Timer: ON
(after 3 minutes)
LCD Brightness: Level 3 (of 5)
Key Tone: ON
IMPORTANT
• Test your monitor before first use.
• Test your monitor regularly to ensure it is functioning correctly.
• Test your monitor every time you move the Sensor Pad to a different place.
12
All manuals and user guides at all-guides.com
ADJUST SOUND LEVEL
73 F
Increase volume
(Up arrow)
Lower volume
(Down arrow)
® monitor can be used with the pre-program factory settings
PUT IN SILENT/MUTE MODE
Press the down
arrow for 2
seconds to mute
sound. Mute icon
will flash.
1/3 full
PARENT UNIT BATTERY ALARM
• Alarm activates when the batteries
need to be recharged.
• Parent Unit will emit a beep sound
every 15 seconds.
• Battery Alarm icon will show
on LCD screen.
73 F
2/3 full full