Publicité
Les langues disponibles
Les langues disponibles
Press the button again and the heating will switch to full power. The display will show
Fig. C.
Press the function button a third time and the unit will return to mode A.
If you press the swivel button
move up and down, changing the direction of the air. Press the swivel button again to
turn this function off.
The timer button
on the unit.
Set the day and time:
Make sure that the unit is in standby mode (S) (use the main switch). You can also set
the day and time while the unit is switched on.
Press the SET button
buttons
/
The display shows "30" and you can use the plus and minus buttons to set the number
of minutes, from 00 to 59.
Press SET again and the display will show
the day: Monday = d1, Tuesday = d2, etc.
Finally, press
before you set the day and time. Press SET to check the day and time.
Set the temperature:
Make sure the unit is switched on then press the plus or minus button;
the standard setting is "23". Press the plus or minus button until you
have reached the required temperature (between 10 °C and 49 °C).
Press OK to confirm the setting. The display shows the set temperature
and the power, for example:
If you have set the temperature, the unit selects the power required: full
power if it needs to heat the room by more than 2 °C and low power if it
needs to heat the room by less than 2 °C. Once the unit has reached
the set temperature, the heating element is switched off but the
ventilator remains switched on for another 30 minutes. This circulates
the air in the room so that the unit can sense whether the room is
cooling down. The unit returns to standby after 30 minutes. The unit switches on again
if the room cools down to 2 °C below the set temperature.
To turn the thermostat off, press the function button
full power. The unit will now work continuously. You no longer see the temperature on
the display, which shows Fig. B or Fig. C. If the unit has been running continuously for
12 hours, it will switch off automatically, cool down and return to standby.
Set the weekly programme:
To set a weekly programme, you first need to set the date and time.
1. Make sure that the unit is in standby mode (S) (use the main switch).
2. Switch the unit on using the on/off button
3. Press
; a "P" now appears in the top left of the display, which shows the weekly
programme screen (see Fig. D).
; you now see "d1" on the display. Press "DAY" again to go to the right day:
4. Press
d1 = Monday, d2 = Tuesday, etc. If you set the day to Monday, the display will show
Fig. E (flashing).
while one of the three functions is set, the flap will
on the remote control works in the same way as the timer button
once; the display now shows "12". Use the plus and minus
to set the hour (from 1 to 23). Press SET again to see the minutes.
to confirm the settings. The display will return to the mode it was in
; use the plus and minus buttons to set
and select heating on low or
.
23
Publicité
