Conrad Electronic REELY MR-600 Notice D'emploi page 53

When the left control lever is deflected to the right, the rudder must deflect to the right when viewed from behind while
looking at the model from behind. When the left control lever is deflected to the left, the rudder must deflect to the left
when viewed from behind (see figure 14).
When the left control lever is pulled towards the body, the rotating speed of the motor will reduce. The motor should be
switched off in the bottom position. When the left control lever is pushed to the front, the rotating speed of the motor
will increase. In the front position, the motor should run at maximum output (see figure 15).
The left control lever for motor control can be pushed forward and back without being moved back to the
middle position by spring force. It always remains in the position into which it was last moved.
Figure 14
Figure 15
53