Publicité
Les langues disponibles
Les langues disponibles
For manual tilting follow the instructions bellow:
1) Under overflow put suitable and heatproof container
2) Make sure, that you let cool down content after frying
3) On the control wheel, tilt manipulating handle
4) for lifting up and draining, circle with control wheel to right, to bring the bath back into operation
position, circle with control wheel to left
5) Try to do lifting up and draining of the bath as smooth as possible to avoid excess vibrating of
the bath
Never pour oil off the bath at frying temperature. Keep maximum attention while manipulating the bath and
its content, some components of the bath could be very hot even the content was cooled.
When you do electric tilting, observe the above warnings and use this button instead of handles. Lift up pan
with up arrow, with down arrow return pan to the basic position
Cleaning:
ATTENTION! The device cannot be cleaned by direct or pressure water. Clean it daily. Daily maintenance
keeps longer useful life and efficiency of the device. Before cleaning make sure to have disconnected the
device from electricity. Always switch off the main feeder to the device. Stainless steel parts wash with
moist cleaning cloth and detergent without groove parts, then dry it with the cloth. Do not use abrasive and
corrosive detergents; do not splash it with running water. Do not try to remove the Dark thin layer on the
bottom of the bath, it does creating protective layer of the surface. After washing treat bottom of the bath
with vegetable oil. When all cleaning procedures finished, return all back in to basic position. In the case of
longer time of appliance unused, leave the lid open to maintain airflow.
-
In case of outage:
-
Immediately shut down water inlet, gas feeder and disconnect from electricity
-
In case of longer outage, we recommend clean the bath and mothball the bottom bath with oil
System of bath tilting
15
Publicité
