Porsche Home Energy Manager 9Y0.915.686 Mode D'emploi page 24

Information
The overload protection always protects that fuse on
the line on which the current sensor configured for
the EEBus device is located and the main fuse.
If, at the place of use, there are no additional current
sensors available, the current sensors of the house
connection can be used to measure the EEBus de-
vice.
Additional current sensors are available as spare
parts from your authorized Porsche dealer.
Information
Update: Phase-individual throttling
In the future, phase-individual throttling of the
charging current will be possible for Porsche vehicles
that are supplied with energy managers. The vehicles
should therefore always be configured to the correct
phase; otherwise it can happen that it will be throt-
tled to the wrong phase. The required settings should
be performed by a qualified electrician.
5. Summary
Before installation is complete, the settings made
should be checked once again in the summary.
Display of the tabular overview:
–
Connection position of the current sensors (line
1: CTx, whereby x= 1–12) and their assignment
to a Phase of the domestic power grid (line 2: L1
to L3).
– In the lines Power sources andDevices, the con-
figured power sources (house connection and, if
required, photovoltaic system) and consumers,
e.g. charger, are listed underneath one another
22
and their assignment to the corresponding phase
(L1, L2, or L3) or current sensor (CTx) is dis-
played.
Completing setup
1. Check the entries and correct if necessary.
2. If all details are correct, select Complete setup.
�� After completion of Home setup, you are
forwarded to the Overview of the web appli-
cation.
Final activities
1. Select the local currency under Settings e Sys-
tem.
2. Perform a manual backup under Settings
e Maintenance.
Setup
The qualified electrician sets up the energy manager
using a web application.
The web application offers extensive configuration
options. Ask the qualified electrician performing the
installation for advice on these and use the help func-
tions within the web application.
e
For information on the web applica-
tion, refer to the instructions at
https://www.porsche.com/international/about-
porsche/e-performance/help-andcontact/
For other languages, select the desired country
version of the website.
Have the following information to hand when setting
up the energy manager:
– Letter containing access data for logging into the
web application
– Access data for your domestic network
– Access data for the user profile (to link it with
your Porsche ID)
– Information on electricity tariffs/prices from the
contract with your power supplier