Porsche Home Energy Manager 9Y0.915.686 Mode D'emploi page 13

Displays and controls
Fig. 4 Displays and controls
Displays Description
LED lights green: Energy manager is
ready for operation
On/off sta-
tus
LED lights green: Internet connec-
tion is established
Internet
status
LED flashes blue: Hotspot mode, no
client connected
WiFi status
LED lights blue: Hotspot mode, at
least one client connected
LED flashes green: Client mode, no
WiFi connection available
Displays Description
LED lights green: Client mode, WiFi
connection available
LED lights or flashes blue: Parallel
operation in client mode is possible
LED flashes green: Searching for
PLC network connection
Powerline
LED lights green: PLC network con-
Communi-
nection established
cation
LED flashes blue: DHCP is activated
(PLC) net-
work sta-
LED lights blue: DHCP (only for PLC)
tus
is active and PLC network connec-
tion established
LED lights green: Network connec-
tion established
Ethernet
status
On: LED lights green during com-
munication (no function currently)
RS485/CA
N status
LED flashes or lights yellow: Error
present
Error sta-
LED lights red: Functional scope re-
tus
stricted
Controls Description
e
To establish a WiFi connection
using the WPS function, press
WPS but-
the WPS button briefly (only
ton
network connection as client is
possible).
e
To activate the WiFi, press the
WiFi button briefly.
WiFi but-
e
To deactivate the WiFi, press
ton (hot-
the WiFi button for more than 1
spot)
second.
e
To activate the PLC connection,
briefly press the PLC pairing
PLC pairing
button.
button
e
To activate the energy manager
as a DHCP server, press the
PLC pairing button for more
than 10 seconds (exclusively
for PLC connections).
e
For a PLC connection to a cli-
ent, briefly press the PLC pair-
ing button again.
11