Activation/Deactivation Of The Lcd Display; Displaying The Battery Charge On The Lcd Display - Wayscral EVERYWAY E-200 N Notice D'utilisation

2. Activation/deactivation of the LCD display

To activate the assistance, press the "ON/OFF" button on the control
unit once (after turning the battery button to ON). All the pictograms on
the LCD screen light up briefly. Once the screen is on, a simple press
on the "ON/OFF" button turns the backlight and the bicycle lights on or
off.
To deactivate the assistance, press and hold the "ON/OFF" button for
3 seconds. The pictograms and the backlight of the LCD screen will go
out.

3. Displaying the battery charge on the LCD display

Under normal conditions, when you turn on the power, the battery
indications show the charge level and the current battery voltage.
When all the segments are lit, it means that the charge level is at
maximum. If the last one is flashing, it means that the battery must be
charged immediately before using the bicycle.
DISPLAY
< - >
CHARGE LEVEL
100%
The battery is dead and requires
immediate charging.
76
80%
60%
40%
20%
EN