Brakes - Wayscral EVERYWAY E-200 N Notice D'utilisation

sufficiently tightened. The adjustment nut therefore needs to be
tightened. The quick release system should mark the fork dropouts
when closed in the locked position.
EN
Each time an adjustment is carried out, check that the front wheel is
correctly centred in relation to the fork. To adjust, close and open the
quick release mechanisms by using the following method:
Adjustment nut
Closed
Open

2. Brakes

Before each use, check that the front and rear brakes are in perfect
working order.
The lever on the right activates the rear brake. The lever on the left
activates the front brake.
It is recommended that you distribute your braking force approximately
60/40 between the front and rear. The brake lever should not be in
contact with the handlebars, and the sheaths should not be bent at right
angles so that the cables can slide with a minimum of friction.
Damaged, frayed or rusty cables must be changed immediately.
63