Wayscral EVERYWAY E-200 N Notice D'utilisation page 58

B. To check the correct height of the seat, sit with your legs straight
and your heel resting on the pedal (fig. B). When pedalling, your
knee will be slightly bent once the foot is in the low position
(fig. A).
WARNING: it is important to fit a cover onto the seat
springs if a child seat is installed in order to prevent any
risks of fingers becoming trapped.
Handlebar adjustment
Both the height and tilt of your bicycle handlebars can be adjusted.
•
Immersion stem (8)
Your bicycle is equipped with a so-called "immersion" stem, whose
height is adjusted by modifying the insertion of the stem inside the pivot
tube of the frame.
To adjust the height of the handlebars, loosen the clamping screw
using a 6 mm hex wrench and raise or lower the stem to the desired
height.
58
EN