Quick Start; Settings; Tyres - Wayscral EVERYWAY E-200 N Notice D'utilisation

II.

Quick start

WARNING: read the instructions and safety recommendations in
this manual carefully before using the power-assisted bicycle.
Your safety and the proper functioning of your bicycle depend on
this.
Once your bike is set up, press the "ON/OFF" button (20) of the battery,
then step on it and start pedalling. After two turns of the chain set, the
power-assisted engine will start and provide you with additional driving
force. A slight humming can be heard, indicating that the engine is on.
If you stop pedalling, the engine turns off and the bike slows down, then
stops like a standard bike. Press on one of the brake levers to brake.
III.

Settings

1. Tyres

Check tyre pressures regularly. Riding with insufficiently inflated or
overinflated tyres can adversely affect performance, cause premature
wear, reduce battery life or increase the risk of accident. If there is
significant wear or a visible groove on one of the tyres, replace it before
using the bicycle. The manufacturer provides a pressure range on the
side of the wheel rim and in the following table. The pressure should
be adapted to the weight of the user.
Bike
Model
size
EVERYWAY
28"
E-200 N
Method for determining the correct adjustment of the quick
release mechanisms (wheel and seat clamp)
The quick release systems are designed to be operated by hand. Never
use tools to block or unblock the mechanism to avoid damaging it.
To adjust the clamping force of the wheel axle, you must use the
adjusting nut and not the quick release lever. If the lever can be
operated with minimal manual pressure, it means that it is not
Size of inner
tubes
700 x 38C
700 x 35/45
(40-622) or (28x1.50)
62
Tyre size PSI
50 - 85
Pressure
Bar
3.5 - 6
EN