Regular Checks; Servicing - Wayscral EVERYWAY E-200 N Notice D'utilisation

III.

Regular checks

Check the tightness of the bolts: lever, crank arm, pedals, stem. The
tightening torques to be applied are as follows:
COMPONENTS
Pedals on crank arms
Crank arm on bottom
bracket
Steering tightness
Tilt stem
Headset tightening
Brake lever
Brake calipers
Seat
Seat post clamp
Wheel
The other tightening torques depend on the size of the nuts: M4: 2.5 to
4.0 Nm, M5: 4.0 to 6.0 Nm, M6: 6.0 to 7.5 Nm. Tighten the screws
evenly to the required torque.
Regularly check the tyres and in particular the tread of the rear tyre:
namely the absence of wear, cuts, cracks and pinching. Replace the
tyre if necessary. Check the wheel rims for excessive wear, warping,
denting, cracks...
IV.

Servicing

For safety reasons and to keep the components in good working order,
you should have your bicycle regularly serviced by your retailer. Your
bicycle should also undergo regular maintenance by a qualified
technician.
RECOMMENDED
TORQUE (Nm)
30 - 40
30 - 40
9 - 10
12 – 14
14 - 15
6 - 8
6 - 8
18 - 20
30
72
SPECIFIC GUIDELINES
Lubricate the threads
Lubricate the threads
Immersion screw (stem)
Quick clamp
EN