Sportplus SP-INV-010 Mode D'emploi page 30

Step 3: Back- and head rest assembly to base frame
14
• Attach the backrest pad (47) and the head pad (48) to the assembled base frame
unit. Use 4 bolts (29), 4 washers (19) and 4 nuts (21).
• Insert incline adjustment bolt (14) into one of the the foreseen holes to limit
inclination to the desired angle and tighten.
• Tighten all bolts.
• Note: The rotating plates must face down when attaching the back rest support
frame or the unit will not invert properly.
SP-INV-010-IM-DE+GB+FR-05.indb 30
21
29
19
21
19
47
2
29
21
29
19
30
21
16/3/2016 18:05