Assembly Instructions - Sportplus SP-INV-010 Mode D'emploi

5. ASSEMBLY INSTRUCTIONS

• Remove all packaging.
• Check for the presence of all parts and for transport damage before starting
assembly.
Step 1: Base frame assembly
22
31
32
1
• Attach the front bottom tube (1) to the left front base frame (9L) and to the right front
base frame (9R) using 2 bolts (32).
• Repeat these steps for the rear bottom tube (1) and rear base frames (8L/8R).
• Insert end caps (31) into both ends of front and rear bottom tube (1).
• Attach the cross bar (12) to the front base frame (9L/R) using 4 bolts (22), 2 base
plates (54), 4 flat washers (19) and 4 nuts (21).
• Unfold the front base frame (9L/R) from the rear base frame (8L/R),
• Insert ball pin (26) through hole on the right side of the base frame.
• Tighten all bolts.
SP-INV-010-IM-DE+GB+FR-05.indb 28
26
9R
54
19
21
21
19
21
12
21
19
32
8R
9L
19
54
22
31
32
31
28
8L
31
1
32
16/3/2016 18:05