Information On Assembly - Sportplus SP-HG-009 Mode D'emploi

• Always use the product on a horizontal, level, nonslip and solid surface. Do not use
it near water, and keep a distance of at least 2 metres around the product for safety
reasons.
• Prevent your arms and legs from coming near the product's moving components.
Do not put any objects into any openings on the product.
• Always wear suitable clothes and slip-resistant shoes.
CAUTION - PRODUCT DAMAGE
• Do not alter the product in any way and use only original replacement parts.
Have all repairs carried out in a professional workshop or from similarly qualified
persons - improper repairs can lead to serious risks for the user. Use the product for
the intended purposes as described in the operating instructions only.
• Shield the product from spraying water, moisture, high temperatures and direct
sunlight.
• Do not use aggressive or abrasive cleaning agents for cleaning the product.

INFORMATION ON ASSEMBLY

• The product should be carefully assembled by a responsible adult. Ask for the
assistance of another, technically-skilled person in case of doubt.
• Before beginning assembly of the product, read all assembly steps carefully and
review the diagram.
• Remove all packaging materials and lay out all the parts. This will give you a
good overview and simplify assembly. Shield the assembly surface from filth and
scratching by laying down suitable padding.
• Check the components against the components list to make sure all are present. Do
not dispose of all packaging materials until assembly is completed.
• Please note that there is always a risk of injury when using tools to carry out manual
tasks. Therefore, please exercise caution when assembling this product.
• Make sure your work environment is hazard-free. For example, do not leave any
tools lying around. Place the packaging materials somewhere where they will
not pose any hazards during assembly. Packaging foil or plastic bags pose a
suffocation hazard for children!
• After assembling the product according to the instructions, make sure that all
screws, bolts and nuts are installed correctly and tightened.
• If necessary, lay out protective padding (not included) beneath the product to
protect your floor as there is no guarantee that, for instance, the rubber feet will not
leave marks behind.
SP-HG-009-IM-V07-INT.indb 19
19
27/2/2019 3:12 PM