Sime Brava Slim 25 BF Manuel Pour L'utilisation, L'installation Et L'entretien page 44

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

SAFETY WARNINGS AND REGULATIONS
m
WARNINGS
– After having removed the packaging
make sure that the product supplied is
integral and complete in all its parts. If
this is not the case, please contact the
Dealer who sold the appliance.
– The appliance must be used as intend-
ed by
Sime
any damage caused to persons, ani-
mals or things, improper installation,
adjustment, maintenance and improper
use of the appliance.
– In the event of water leaks, disconnect
the appliance from the mains pow-
er supply, close the water mains and
promptly inform professionally quali-
fied personnel.
– Periodically check that the operating
pressure of the water heating system
when cold is
case, increase the pressure or contact
professionally qualified personnel.
– If the appliance is not used for a long
period of time, at least one of the fol-
lowing operations must be carried out:
- set the main system switch to "OFF";
- close the gas and water valves for the
water heating system.
– In order to ensure optimal appliance
operations
maintenance and checks are carried
out
ONCE A YEAR
– If the power cable is damaged, replace
it with a cable ordered as a spare part
with the same characteristics (type X).
Assembly must be by carried out by a
qualified professional.
44
who is not responsible for
. If this is not the
1-1.2 bar
recommends that
Sime
.
m
WARNINGS
It is recommended that all operators
read this manual carefully in order to
use the appliance in a safe and rational
manner.
is an integral part of the
This manual
appliance. It must therefore be kept for
future reference and must always ac-
company the appliance in the event the
appliance is transferred or sold to an-
other Owner or User or is installed on
another system.
Installation and maintenance
pliance must be carried out by a qual-
ified company or by a professional-
ly qualified technician in accordance
with the instructions contained in the
manual. Once the work is complete,
the company or technician will issue a
declaration of conformity with national
and local technical standards and legis-
lation in force in the country where the
appliance will be used.
Any repairs on the appliance
carried out solely by professional-
ly qualified personnel, using original
spare parts only. Failure to comply with
these instructions can jeopardise the
appliance's safety and void the warranty
with immediate effect.
Fonderie SIME S.p.A.
to make improvements to its products
at any time without prior notice, without
compromising their essential charac-
teristics. The graphic illustrations and/
or images in this document may show
optional accessories that vary accord-
ing to the country in which the appli-
ance is used.
EN
of this ap-
must be
reserves the right

Publicité

Table des Matières
loading

Table des Matières