Tools Required - R&G LP0217BK Mode D'emploi

Page | 2
LEGEND
ITEM 1 = R&G TAIL LIGHT (LA0007) (x1).
ITEM 2 = M6 x 16mm LONG BUTTON HEAD BOLTS (x2).
ITEM 3 = M6 x 12mm OD WASHERS (x12).
ITEM 4 = INDICATOR MOUNTS (TB0217 Part 2) (x2).
ITEM 5 = M12 x 19mm OD WASHERS (x2).
ITEM 6 = M6 x 6mm LONG BUTTON HEAD BOLTS (x2).
ITEM 7 = M6 NYLOC NUTS (x4).
ITEM 8 = LICENCE PLATE BRACKET (TB0217 Part 1) (x1).
ITEM 9 = M6 x 20mm LONG BUTTON HEAD BOLTS (x2).
ITEM 10 = 2.5mm CABLE TIES (x5).
ITEM 11 = 150mm LENGTH OF HEATSHRINK (x3).
ITEM 12 = SELF-ADHESIVE CABLE CLIPS (x2).
ITEM 13 = REFLECTOR (x1).
ITEM 14 = TAIL LIGHT CONNECTOR (CON0052) (x1).
Please note that in cases where kits are packed with rubber washers holding the components onto the bolt – the
Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301
rubber washers should be thrown away!

TOOLS REQUIRED


4, 5 & 6mm Allen keys.

6, 10 & 12mm spanners and sockets.


MAXIMUM TORQUE SETTINGS




Unit 1, Shelley's Lane, East Worldham, Alton, Hampshire, GU34 3AQ
Phillips screwdriver.
Cable cutters.
M4 Bolt = 8 Nm
M5 Bolt = 12 Nm
M6 Bolt = 15 Nm
M8 Bolt = 20 Nm
R&G Racing
www.rg-racing.com Email: info@rg-racing.com