Dangers And How To Avoid Them; Usage In Accordance With Specification; Improper Usage - Parker EOMAT ECO Guide D'utilisation

EOMAT ECO

1.3. Dangers and how to avoid them

Safe working on the machine requires a combination of machine, controls, tooling, pro-
tection equipment and proper safety behaviour by the user.
In the majority of machine accidents, injuries are caused by self-closing tools. In these
cases mainly finger and hand injuries are involved. The risk of injury applies just as much
to other people as to machine operators.
1.4. Use in accordance with specification
The EOMAT ECO provides pre-assembly of EO Progressive ring and EO-2 tube fittings
onto tube ends and ISO 8434-1 cutting ring tube fittings.
Only tubes in sizes 6 to 42mm OD can be used for the assembly process.
Use in accordance with the specification of the EOMAT ECO machine presupposes that
the machine will be used only within the framework of the possibilities indicated by the
technical specification and will be operated only when in perfect functional order.
Other applications can be dangerous and exclude any further indemnification whatsoever.
The manufacturer is not liable for damage or injury which result from improper use.
1.5. Specified tooling
The operating company is obliged to use only such suitable tools as are manufactured in
accordance with our specifications, with special reference to
-
-
-
1.6. Improper use
1. Use other than that detailed above is not permitted, because dangers can arise
during improper use which can injure people working on the machine or in its vicin-
ity, or damage the machine.
2. Common improper uses:
-
-
-
-
material
heat treatment
geometry
vicing machine parts, eg bearings, bearing bushes
use of unsuitable tools
seamed applications
processing materials unsuitable for forming
Page 9 EOMATECO/MANUAL