Cub Cadet XR2 1000 Manuel Utilisateur page 19

OPTION 2
Wire the Zone separately and connect it to a Perimeter Switch
(optional accessory).
Main Zone
Power Supply
and Base Station
36
Perimeter
Switch
G. Complete Wire Setup
Once the Perimeter Wire has been laid completely, the two ends of
the wire that meet at the Base Station should be joined together.
• Use the same peg to fasten both tail ends of the wire
to the ground
• Trim the ends so both wires are the same length
TIPS
Make sure you twist the two wires together properly.
37