Cub Cadet XR2 1000 Manuel Utilisateur page 18

• If a Narrow Pass is shorter than 2 m [7 ft], set up only one
square Perimeter Island in the passage
• Take care to wire Narrow Passes correctly to ensure that the
mower doesn't cross into different zones spontaneously while
mowing
10cm [4in]
28cm
[11in]
Main Zone
Narrow Passes should be firm, level, and smooth.
34
A helpful video
is available
online
TIPS
Sub Zone
Two wires
under
same peg
F. How to Wire a Separated Zone
Type C / Type D
Don't have a Separated Zone?
Skip this section!
If your Separated Zone is larger than 100 m
your mower won't be able to finish it in a single operation.
Therefore, it is recommended to wire it separately and connect
it to its own Base Station.
If your Separated Zone is smaller than 100 m
can wire it in one of two ways.
OPTION 1
Extend the Perimeter Wire from the Main Zone,
over the obstacle.
Base Station
/ 1100 ft ,
2 2
/ 1100 ft , you
2 2
Two wires
under
same peg
35