Cub Cadet XR2 1000 Manuel Utilisateur page 13

Consideration C
Make sure the ground is even and
flat, and that there are no slopes
• If there are additional zones in your lawn, place the Base
Station within the largest zone
• In a flat and shady spot to extend battery life
• Keep a distance of at least 1 m / 3 feet from sprinkler heads
to avoid hitting the mower directly and damaging its internal
components
24
Lay the perimeter wire ("virtual boundary"), which
defines the working area for the mower.
Now you're ready to install the Perimeter Wire.
Let's take it step by step.
• Have the mower's package nearby.
• Be sure to cut your grass with your old mower one last time
TIPS
• Hammer
• Small, flat screwdriver
• Combination pliers
WHAT
YOU'LL
NEED
First things first: obstacles and slopes
Before you put a single peg into the ground, take note of any
obstacles or slopes.
TIPS
OBSTACLES
Lay
the Wire
before you start wiring. This will make inserting pegs easier and
help ensure that the mower doesn't cut the wire.
Soft Obstacles
Soft obstacles are flower beds,
ponds or small trees. They need to
be protected by creating Perimeter
Islands.
25