Cub Cadet XR2 1000 Manuel Utilisateur page 10

Blade Tool
For safe removal of the
blades
Spare Plot Connector
For connecting the
Perimeter Wire to the
Base Station
Cutting Height Extender
For an easier adjustment of
the cutting height
Wire Connectors
For splicing the Perimeter
Wire in case of a cut
RoboRuler
For measuring the Perimeter
Wire's distance from lawn's edge
Ready? Let's begin...
18
Base Station Stakes (x4)
For affixing the Base
Station to the ground
Wire Pegs*
For securing the wire
to the ground
(*) Not provided with
Pro/XR2 models
Know
your lawn
Understanding your lawn will save you unnecessary
mistakes and make the installation process easier and
more straight-forward.
You can also skip some later sections in this manual that are not
relevant to your lawn type.
So, what does your lawn look like?
Type A
Main Zone only
Your lawn area is one continuous
zone and all areas of the lawn are
wide enough for the mower to
navigate through (at least 2 m
(7 ft) wide at its narrowest point).
Type B
Main Zone + Sub Zone
Your lawn consists of more
than one zone.
These zones are connected by
a narrow passage (1-2 m /
3-7 ft wide).
The mower can drive between
these zones to mow the entire
area.
Main Zone
Main Zone
Sub Zone
19