Operational Safety; Returns; Identification; Unit Identification - Endress+Hauser PROFIBUS-PA RID 261 Mise En Service

2. Identification

1.3 Operational safety

Hazardous areas
When using the unit in hazardous areas the respective national
safety regulations must be observed. Make sure that all
personnel is appropriately skilled and trained. All measurement
and safety relevant requirements of the measurement point
must be observed.
Technical advancement
The manufacturer reserves the right to improve and update the
technical details without the necessity for any advance notice.
Information on amendments made to these operating
instructions can be obtained from the relative dealership.

1.4 Returns

When returning the unit for repair please always place as
detailed a description of the fault and the application as
possible with the unit. On transport damage please immediately
inform both your suppliers as well as the shipping agent.
1.5 Safety hints and pictograms
Please take note of the following pictograms:
Hint: Hints for better installation
Attention: Ignoring this note can lead to damage of the device
2. Identification

2.1 Unit identification

The correct unit?
Please compare the order code on the legend plate with that on
the delivery note.

2.2 What is delivered

- PROFIBUS-PA display, model dependent on order.
- Operating manual
- Accessories according to the order
24
or faulty operation!