System; System Construction; Installation; Installation Conditions - Endress+Hauser PROFIBUS-PA RID 261 Mise En Service

3. Function and system construction
3. Function and system
construction
3.1 Function
Display of process information (e.g. measured value and
alarm condition), for the fieldbus user (e.g. sensor or
actuator) connected to the PROFIBUS-PA network. The
process value is displayed as a 7 digit number, process
condition is displayed using set point markers.

3.2 System construction

Microcontrolled front end display with PROFIBUS-PA
interface and LC display. The display is updated every
second.

4. Installation

4.1 Installation conditions

Installation dimensions (in mm)
The unit can be installed either on a wall or a stand pipe.
In order to do this an optional wall or stand pipe mounting
kit can be ordered and used. (See chap. 9 Accessories).
25