Operation; Switching On And Setting The Power; Residual Heat Indicator - Asko HI1345G Mode D'emploi

OPERATION

Switching on and setting the power

Residual heat indicator

The cooking zones have 12 levels. Beside it there is a level 'boost'.
1. Put a pan into the cooking zone.
2. Press the childproof lock button.
You will hear a signal.
3. Press the on/off button of the cooking zone concerned.
In the display '-' will blink and you will hear a signal. If no cooking
setting is selected after a zone is switched on, the cooking zone
switches off automatically after 10 seconds.
4. Press the + or - button, or the << or >> button to select the desired
setting. The cooking zone starts automatically in the level that has
been set (when a pan is detected).
▷ If you press button + or - first, level 6 appears.
▷ If you press button >> first, level 12 + 'boost' appearin the
display. This is power level 'boost' and you can use this setting
if you want to bring dishes to the boil quickly (see page 12).
▷ If you press button << first, level 1 will appear.
Tips
• With the + or - button you can raise or reduce the power setting
step by step. By pressing the << or >> button, you can raise or
reduce the power setting quick.
• Press and hold the << , - , + or >> button to set the desired power
level more quickly.
Pan detection
If the hob doesn't detect a (suitable) pan after a cooking power has
been set, the display will continue to flash and the cooking area remains
cold. When no (suitable) pan is placed within one minute, the cooking
zone will switch off automatically.
If the cooking zone has been used intensively it will retain heat for
several minutes afterwards. As long as the cooking zone is still hot an
"H" will be visible in the display.
EN 11