Tools Required - R&G CP0428BL Notice De Montage

LEGEND
ITEM 1 = CRASH PROTECTOR CAPS- L&RHS (BC0002) (x2).
Page | 3
ITEM 2 = CRASH PROTECTOR BOLTS- L&RHS, M12x1.25x120mm LONG HEX HEAD (x2).
ITEM 3 = M12 PLAIN WASHERS- L&RHS (x2).
ITEM 4 = LOCKING WASHERS- L&RHS (LW0001) (x2).
ITEM 5 = CRASH PROTECTORS- L&RHS (B0061 with CS340, 12mm) (x2).
ITEM 6 = SPACER, L&RHS (S1034=63mm LONG) (x2).
ITEM 7 = M6 FLAT CAPS- L&RHS (x8).
ITEM 8 = FRONT CLAMPING BOLTS- L&RHS, M6x65mm LONG CAP HEAD (x4).
ITEM 9 = LEFT HAND SIDE MAIN MOUNTING PLATE (M0511) (x1).
ITEM 10 = FRONT MOUNTING BLOCK-L&RHS (M0513) (x2).
ITEM 11 = FRAME CLAMPS (F0046) (x4).
ITEM 12 = REAR MOUNTING BLOCK-L&RHS (M0514) (x2).
ITEM 13 = REAR CLAMPING BOLTS- L&RHS, M6x65mm LONG CAP HEAD (x4).
ITEM 14 = RIGHT HAND SIDE MAIN MOUNTING PLATE (M0512) (x1).
Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301

TOOLS REQUIRED

•
Socket set to include 19mm A/F socket and wrench.
•
Hex drive bits or set of Allen keys.
•
Torque wrench (up to 40Nm).
PICTURE 1
PICTURE 3
Unit 1 Shelleys Lane, East Worldham, Alton, Hants GU34 3AQ
R&G Racing
www.rg-racing.com Email:
CP0428
PICTURE 2
PICTURE 4
info@rg-racing.com